Salt Spray (Fog Test) Chamber

The SALT (FOG) SPRAY test is a standardized and popular corrosion test method. Used to check corrosion resistance of materials and surface any type of coatings.

Generally the materials to be tested are like metallic, polymer, and may more different type of materials to be tested and finished with a surface coating which is intended to provide a degree of corrosion protection to the underlying metal.


Salt (Fog) spray testing is an accelerated corrosion test that produces a corrosive attack to coated samples in order to evaluate (mostly comparatively) the suitability of the coating for use as a protective finish.

The appearance of corrosion products rusting or other oxides is evaluated after a pre-determined period of time. Test duration depends on the corrosion resistance of the coating; generally, the more corrosion resistant the coating is, the longer the period of testing before the appearance of corrosion/ rust.

The salt spray test is one of the most widespread and long-established corrosion tests. ASTM B117 was the first internationally recognized salt spray standard. Other important relevant standards are ISO9227, JIS Z 2371 and ASTM G85. The salt spray (or salt fog) test is a standardised and popular corrosion test method, used to check corrosion resistance of materials and surface coatings.

Fog Test Chamber is intended for performing different type of test of corrosion Conditions, where the temperature with steamed humidity on sample environment must be controlled within certain limits.

The role of environment testing into examine and prove the suitability, reliability, durability of products through the exposure to the environmental effects of temperature, humidity..e.t.c. Acceleration of the environmental effects that these products will experience in nature is required.

Our policy of continual liaison with leading researchers ensures we maintain our premier position as suppliers of high quality Salt spray corrosion test chamber and associated facilities. ISOTECH Salt spray corrosion test chamber, were designed with Safety, Reliability, Ease of operating and ergonomically.

Main Features

Test space dimensions are 50 liters to 2000 liters. Following performance data can be realized as in combined Or single test.

  • Salt spray fog test temperature Range is RT +5° C to +50° C.
  • Condensed water test temperature range is RT +5° C to +45° C.
  • Drying & Ventilation temperature range is RT +5° C to +60° C.
  • Climate tests temperature range is +20° C to +60° C. Humidity Range 20 % RH to 95% RH.


We deal with

Environmental Simulation Products
BOD Incubator
Cold Chamber
De Humidifier
Deep Freezers
Dust Chambers
Growth Chambers
Hot and Cold Chambers
Hot air Oven Chambers
Humidity Chambers
Reach in Growth Chambers
Salt Spray Chambers
Solar Chambers
Stability Chambers
Thermal Shock Chambers
Tray Dryer
Walk-in Cold Chambers
Walkin Environmental Chambers
Walkin Hot and Cold Chamber
Water Heated Jacket Oven

Leave a Reply

Your email address will not be published. Required fields are marked *