Complete Solution for Environmental Stimulation.

Thermal Chamber

  • Thermal Chamber ( Hot & Cold Test)

    Posted in Thermal Chamber on Jul 22, 2020

    Thermal Chamber ( Hot & Cold Test) Isotech Thermal chambers (Hot & Cold) are ideal for test applications that require quick change in temperature ramp rate such as 1°C and 5°C per minute or as required from clients. In such applications ramp rate of hot and cold temperatures is important and also mandatory in some standards such as it is constructed in compliance with DIN, MIL, IEC, IS 9000, JESD, SAE and IPC. These chambers are widely used for testing PCB, electronic components, Electrical components semiconductor devices, battery, various electronic devices like mobile phones and monitor et...

  • Thermal Shock Chamber with Humidity test

    Posted in Thermal Chamber on Jul 07, 2020

    THERMAL SHOCK CHAMBER WITH HUMIDITY TEST This Thermal Shock Chamber is conforming to JSS-55555:2012 & MIL-STD-810 (For Testing of equipments) and JSS-50101, IS-9000-Part-14, MIL-STD-883 & MIL-STS-202 (for testing of components). A Horizontal Orientation Thermal Shock Chambers has three side-by-side independent zones: Hot, Ambient, and Cold. The addition of the ambient zone allows for three zones testing, which is a requirement of some military standards. This unique and versatile chamber configuration can also be used for two zone tests. Thermal Shock Chambers are designed to perform tailo...


    Posted in Reach in Growth Chambers, Growth Chamber, Environmental simulation Products, Cold Chamber, BOD Incubator, Salt Fog Test Chamber, De Humidifier, Dust Chambers, Hot air Oven, Solar Voltaic Products, Deep Freezers, Thermal Chamber on Jul 07, 2020

    INGRESS PROTECTION TEST Standards as per IEC 60529 Edition 2.2 2013-08. Ingress Protection testing, or IP testing, determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress. The value of trusting Element with your Ingress Protection (IP) testing is clear. The Ingress Protection standard we most commonly test to is BS EN/IEC 60529. The test facility will meet the degree of protection testing for the test samples /products. The test setup of turn table will withstand the test samples Weight of: 0.5 to 15 Ton. The hand held spray nozzle device provide...

  • Thermal Chamber for NVH lab

    Posted in Thermal Chamber on Feb 17, 2020

    Thermal Chamber for NVH lab ISOTECH Technology achieved one more milestone in his history. Thermal Chamber for NVH lab to carry out a performance test of all Car Air Condition. It will be measuring and given output results of near 28 to 32 different parameters through the SCDA system. Results are including Temperature Airflow of chamber High wind speed across on Condenssor as well as evaporators Compressor performance with different RPM Crack heater status Automatic Thermostatic Expansion Value status and so many other parameters. This facility to check the performance of Air condition uni...