Posted in Reach in Growth Chambers, Growth Chamber, Environmental simulation Products, Cold Chamber, BOD Incubator, Salt Fog Test Chamber, De Humidifier, Dust Chambers, Hot air Oven, Solar Voltaic Products, Deep Freezers, Thermal Chamber on Jul 07, 2020
INGRESS PROTECTION TEST Standards as per IEC 60529 Edition 2.2 2013-08. Ingress Protection testing, or IP testing, determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress. The value of trusting Element with your Ingress Protection (IP) testing is clear. The Ingress Protection standard we most commonly test to is BS EN/IEC 60529. The test facility will meet the degree of protection testing for the test samples /products. The test setup of turn table will withstand the test samples Weight of: 0.5 to 15 Ton. The hand held spray nozzle device provide...
Posted in Uncategorized, Reach in Growth Chambers, Growth Chamber, Environmental simulation Products, Cold Chamber, BOD Incubator, Salt Fog Test Chamber, De Humidifier, Dust Chambers, Hot air Oven, Solar Voltaic Products on Oct 31, 2018
Humidity Chamber Humidity can be added by air humidifiers, and removed by air dryers. You may need to take air flow from other areas (e.g. Outside) into account: either by avoiding them, or by taking them into account when planning for the capacity of the units. Air conditioning changes humidity as well: through temperature changes the relative humidity is affected intensely, depending on the kind of air conditioning unit it could either lower or raise the ambient humidity. We deal with Environmental Simulation Products BOD Incubator Cold Chamber De Humidifier Deep Freezers Dust Chambers Gro...
Posted in Environmental simulation Products, Hot air Oven on Jul 02, 2018
Use of Hot Air Oven Hot Air Oven Hot air furnaces are electrical devices that use dry heat to sterilize them. Originally developed by Pasteur. Generally, it can be operated from 50 to 300 ° C, using a temperature regulator to control the temperature. The double wall insulator keeps heat and maintains energy, and the inner layer is a poor connector and a metal outer layer. There is also a full area of air to help in isolation. The air circulation fan helps in the uniform distribution of heat. These are equipped with adjustable wire shelves or aluminum trays and can have an on / off switch, a...