Complete Solution for Environmental Stimulation.

Dust Chambers

  • INGRESS PROTECTION TEST

    Posted in Reach in Growth Chambers, Growth Chamber, Environmental simulation Products, Cold Chamber, BOD Incubator, Salt Fog Test Chamber, De Humidifier, Dust Chambers, Hot air Oven, Solar Voltaic Products, Deep Freezers, Thermal Chamber on Jul 07, 2020

    INGRESS PROTECTION TEST Standards as per IEC 60529 Edition 2.2 2013-08. Ingress Protection testing, or IP testing, determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress. The value of trusting Element with your Ingress Protection (IP) testing is clear. The Ingress Protection standard we most commonly test to is BS EN/IEC 60529. The test facility will meet the degree of protection testing for the test samples /products. The test setup of turn table will withstand the test samples Weight of: 0.5 to 15 Ton. The hand held spray nozzle device provide...

  • Hot chamber vs cold chamber (Die casting)

    Posted in Growth Chamber, Cold Chamber, Dust Chambers on Jul 21, 2019

    Hot chamber vs cold chamber (Die casting) High pressure die casting (HPDC) is where liquid metal is infused under exceptionally high pressure into premium steel molds (dies on) so as to make high precision die cast products. The die is intended to cast designed shapes and complex features with extraordinary accuracy and consistent replication. There are two types of HPDC which Chicago White Metal gives: hot chamber die casting and cold chamber die casting. Despite the fact that there are a few similarities between the two sorts, they exist independently for various purposes. Hot Chamber Die...

  • Ingress Protection Test Equipment

    Posted in Dust Chambers on Jun 24, 2019

    Dust Test: Ingress Protection Test Equipment is used to determine the degree of protection provided by a product enclosure. The level of protection provided by an enclosure is represented by an "IP" code. The first digit indicates protection against ingress of solid foreign objects. The equipment for these tests is provided below. The equipment fully complies with IEC 60529 (IP Code standard) and all other international standards with similar tests. 5X - Dust Protected (limited Ingress) 6X - Dust Tight Protection

  • How can I control humidity in industrial buildings?

    Posted in Uncategorized, Reach in Growth Chambers, Growth Chamber, Environmental simulation Products, Cold Chamber, BOD Incubator, Salt Fog Test Chamber, De Humidifier, Dust Chambers, Hot air Oven, Solar Voltaic Products on Oct 31, 2018

    Humidity Chamber Humidity can be added by air humidifiers, and removed by air dryers. You may need to take air flow from other areas (e.g. Outside) into account: either by avoiding them, or by taking them into account when planning for the capacity of the units. Air conditioning changes humidity as well: through temperature changes the relative humidity is affected intensely, depending on the kind of air conditioning unit it could either lower or raise the ambient humidity. We deal with Environmental Simulation Products BOD Incubator Cold Chamber De Humidifier Deep Freezers Dust Chambers Gro...

  • Dust chambers

    Posted in Environmental simulation Products, Dust Chambers on Nov 30, 2017

    Why Dust Chambers? The ISOTECH dust chambers give an instant answer to basic dust test guidelines for the car and electronic-cabinets prerequisites. Regularly indicated for use with "Arizona fine clean", these units can likewise be utilized with talcum or solid powder. The chamber has a "clamshell" sort entryway/top for simple front-stacking, contrasted and top-stacking chambers. Discretionary reach-in glove ports permit pivoting the test without opening the entryway. Dust tests / Dust chambers are used to perform to test functioning of electronic components under extreme environmental cond...