Complete Solution for Environmental Stimulation.

Cold Chamber

  • INGRESS PROTECTION TEST

    Posted in Reach in Growth Chambers, Growth Chamber, Environmental simulation Products, Cold Chamber, BOD Incubator, Salt Fog Test Chamber, De Humidifier, Dust Chambers, Hot air Oven, Solar Voltaic Products, Deep Freezers, Thermal Chamber on Jul 07, 2020

    INGRESS PROTECTION TEST Standards as per IEC 60529 Edition 2.2 2013-08. Ingress Protection testing, or IP testing, determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress. The value of trusting Element with your Ingress Protection (IP) testing is clear. The Ingress Protection standard we most commonly test to is BS EN/IEC 60529. The test facility will meet the degree of protection testing for the test samples /products. The test setup of turn table will withstand the test samples Weight of: 0.5 to 15 Ton. The hand held spray nozzle device provide...

  • Hot chamber vs cold chamber (Die casting)

    Posted in Growth Chamber, Cold Chamber, Dust Chambers on Jul 21, 2019

    Hot chamber vs cold chamber (Die casting) High pressure die casting (HPDC) is where liquid metal is infused under exceptionally high pressure into premium steel molds (dies on) so as to make high precision die cast products. The die is intended to cast designed shapes and complex features with extraordinary accuracy and consistent replication. There are two types of HPDC which Chicago White Metal gives: hot chamber die casting and cold chamber die casting. Despite the fact that there are a few similarities between the two sorts, they exist independently for various purposes. Hot Chamber Die...

  • Hot and Cold Chamber

    Posted in Cold Chamber on Nov 18, 2018

    Hot and Cold Chamber : Things to consider while buying! The hot and cold chambers are designed to withstand the testing of certain samples in a cold or hot environment. They are designed in a certain way to control temperatures and stabilize them to some extent. Die casting is a process that is carried out mainly with heat and cold chambers. The equipment used in the industry for testing is generally large scale. It takes a lot of research and development from the end of the buyer to make the right decision regarding the seller, the type of camera and the background of the seller. Here are som...

  • How can I control humidity in industrial buildings?

    Posted in Uncategorized, Reach in Growth Chambers, Growth Chamber, Environmental simulation Products, Cold Chamber, BOD Incubator, Salt Fog Test Chamber, De Humidifier, Dust Chambers, Hot air Oven, Solar Voltaic Products on Oct 31, 2018

    Humidity Chamber Humidity can be added by air humidifiers, and removed by air dryers. You may need to take air flow from other areas (e.g. Outside) into account: either by avoiding them, or by taking them into account when planning for the capacity of the units. Air conditioning changes humidity as well: through temperature changes the relative humidity is affected intensely, depending on the kind of air conditioning unit it could either lower or raise the ambient humidity. We deal with Environmental Simulation Products BOD Incubator Cold Chamber De Humidifier Deep Freezers Dust Chambers Gro...

  • Cold Chamber Machines vs. Hot Chamber

    Posted in Cold Chamber on May 27, 2018

    Cold Chamber Machines vs. Hot Chamber Machines The Concept People who do not participate in this area usually have a general understanding of the gears. For many, you may only go as far as familiar with key terms, such as knowing that the template is referred to as death. Expanding this concept may explain that the templates act as a variable element, and are injected with molten metal. This process is usually done under high pressure and exercise force to death. The molten metal can be injected in two different ways, and the difference between the two is referred to as hot and cold circuit pr...

  • Environmental Simulation

    Posted in Reach in Growth Chambers, Growth Chamber, Environmental simulation Products, Cold Chamber, BOD Incubator, Salt Fog Test Chamber, De Humidifier on Jul 26, 2017

    What is Environmental Simulation As materials and parts are required to perform dependably under progressively requesting working conditions, ISOTECH natural reproduction frameworks can enable you to increase important understanding under such conditions in a controlled, repeatable test lab condition. These arrangements correctly duplicate genuine stacking at high temperatures and in different conditions. Accessible frameworks incorporate high-temperature heaters, natural chambers and liquid showers. All ISOTECH ecological recreation frameworks are intended for quick, consistent coordination...

  • Cold Chamber

    Posted in Cold Chamber on Jun 12, 2017

    Cold Chamber Manufacturer in Bangalore Cold chamber / Cooler chamber is intended for performing different type of test where the temperature of sample environment must be controlled within certain limits. The role of environment testing into examine and prove the suitability, reliability, durability of products through the exposure to the environmental effects of temperature, Acceleration of the environmental effects that these products will experience in nature is required .Cold chamber, Cooler Chamber is intended for performing different type of test where the temperature of sample environme...